Highway Star – Cured Concrete (24″-30″)

$775.00$1,115.00

Buy this product and get 5% cashback

Call us for bulk pricing. 800-282-6470

SKU: N/A Categories: ,

The Highway Star Concrete Blade is a high performing blade made for road saws 30 to 70 HP. This tool has a soft/medium bond providing aggressive cutting, especially when encountering rebar and hard aggregates like granite.

The diamond segments are 10mm high, laser welded onto a precision steel core. It has full radius undercut segments to keep the steel core from wearing, and the blade from losing segments. This design prevents damages and extends the service life of the blade, allowing the diamonds to stay sharp and exposed when cutting hard materials. This keeps the blade at its peak cutting performance.

With the same concentration level as our ProStar blade but featuring a 3mm shorter segment, it provides a more economical option for smaller jobs.

Quality Level: Professional Grade 

Wet/Dry: Wet ONLY

Materials: Cured Concrete with Steel Reinforcements

Equipment: High HP Saws 30 – 70 HP

How to Use:

  • Make sure that you have chosen the proper blade for the application.
  • Assure that the saw blade flange, shaft and guard are in good condition. Check your manufacturer’s user guide for safety precautions.
  • Mount the blade in the proper rotation. Check for an arrow on the saw blade or look at the diamond segment to determine the direction. The diamond in the matrix appears as a “comet” with a diamond head and a “tail” following behind. The direction of the blade follows the “comet”.
  • When cutting through a slab, make sure that you clear the blade from the cut before the slab shifts. If not, you could pinch the blade between the slabs immediately inhibiting the blade and possibly tearing away segments.
  • To remove the blade, cut it free from the slab using another blade instead of pulling it out or risk bending the core.

 

Tips & Tricks:

Never force the blade to cut, allow the weight of the saw be the cutting pressure. Always keep the RPMs of the saw constant.

Start by making a very shallow ½” cut to establish a base guide.

If the blade becomes dull, cut a concrete block to re-dress the blade.

Make sure that you vacuum and clear any dust that is left in the crack to prevent unwanted adhesion.

Anything that is extremely abrasive or fine should be cut with a material specific blade.

 

 

Questions or concerns? Volume discounts available! Feel free to call or email!