Surface Texturing & Grooving

concrete and asphalt cutting and drilling title
grinding, stripping, and scrapping application title
masonry, tile and hardscape cutting application
surface and marking removal application method
surface cleaning and finishing title
surface leveling title
surface texturing and grooving title
Order Star Diamond Tooling
Watch Diamond Equipment Video Library

Surface Texturing & Grooving

These products remove coatings and surfaces leaving textured finishes.

Air-Powered Crete-Crushers™ hammer carbide bits into concrete surfaces removing up to ¼” per pass. They’re used for drastic removal jobs but will also texture concrete, and prepare the surfaces for new coatings.

Crete-Planers™ aggressively remove surface material up to 1/8” per pass using carbide and steel cutters. Crete-Planers™ also texture, level, clean, and etch surfaces.

10″ Hardscape Saw

$0
0 review(s)

IDEAL FOR

  • Cutting interlocking pavers, brick, stepping & cultured stones
  • Professional paver installers
  • Landscapers
  • Masons
  • Rental stores and do-it-yourselfers

10″ WALK-BEHIND CRETE-PLANER™

$0
0 review(s)

  Ideal For:

  • Aggressive removal of material
  • Production scarification
  • Heavy coatings removal

14″ EDCO Hardscape Saw

$0
0 review(s)

Made and Manufactured in the USA! Includes 14” Segmented Diamond Blade Cuts interlocking pavers, 4” retaining wall block and brick, wet or dry Shock mounted engine platform minimizes vibration to cutting head and rolling table for cleaner cuts Hose hookup included to provide clean water supply Unique pan drain relocates water away from worksite Choose…

20″ EDCO Masonry Saws

$0
0 review(s)

IDEAL FOR

  • Professional masons
  • Block manufacturers & Block masons
  • Paver manufacturers & Paver installers
  • Landscape suppliers & Landscape companies
  • Masonry equipment suppliers

 

EDCO 14″ Downcut Saw

$0
0 review(s)

IDEAL FOR…

  • Short-run slab cutting
  • Contraction joints
  • Patch repairs in asphalt
  • Traffic loop installation and trenching

Get into contact with us for financing options at 1.800.282.6470
Cost: $1767.00 (USD)

EDCO 14″ Upcut Saw

$0
0 review(s)

Made in the USA. Rental Tough. Gasoline, electric and air-power options Up-cut blade rotation provides level surface at the base of the cut Vacuum port Heavy-duty, 7-gauge steel frame & undercarriage eliminates bending and vibration Optional air motor comes fully equipped with lubricator, moisture seperator and a convenient, handle-mounted on/off valve (Requires 160 CFM at…

EDCO 18″ Downcut Saw

$0
0 review(s)

Made in the USA. Rental Tough. Heavy-Duty Anti-Vibration engine mount Screw boot belt tensioner prevents frame damage 18″ blade capacity 7-gauge steel blade guard with welded protective segment flap Heavy-Duty lifting bail 13 HP gasoline engine or 5 HP electric options Heavy-Duty 7-gauge steel laser cut frame Large screw-type depth control Wide-T handles with rubber…

EDCO 20″ Electric Scrubber

$0
0 review(s)

Rugged, Easy to Use and Dependable. Wet Scrub and Dry Vacuum in ONE PASS 12 Gallon Solution Tank 15 Gallon Recovery Tank 3/4 hp Brush Motor / 220 RPM 1/2 hp 24 volt Vacuum Motor 65lb Scrubbing Pressure Pad holder with red scrubbing pads Squeegee width 30” Power Source 2-130 AH 12v Deep Cycle Lead/Acid…

EDCO 20″ Self Propelled

$0
0 review(s)

Made in the USA. When only the best will do! Stressproof, precision-machined, 1 3/4″ steel arbor shaft Includes electric start, 12-volt battery and heavy-duty 15-amp charging system Swing-away, rear 3-gallon fuel tank Screw-type depth control w/lock guarantees accurate cutting IDEAL FOR… Highway, road and bridge deck repair Utility installation Traffic loop installation SS-20-10 Part# 33100…

EDCO 24″ Self Propelled

$0
0 review(s)

For when performance matters! Self-Propelled gear drive system Stress-proof, precision-machined, 1 1/4″ steel arbor shaft Includes electric start, 12-volt battery and heavy-duty 15-amp charging system Inside mounted, 3-gallon fuel tank Screw-type depth control w/lock guarantees accurate cutting Heavy-duty lifting bail IDEAL FOR… Highway, road and bridge deck repair Utility installation Traffic loop installation SS-24-24H Part#…

EDCO 26″ Self Propelled

$0
0 review(s)

Made in the USA. For when performance matters! Stressproof, precision-machined, 2″ steel arbor shaft Includes electric start, 12-volt battery and heavy-duty 30-amp charging system Locking depth control allows operator to easily return to same depth, cut after cut Positive-traction, chain drive rear axle prevents slippage and improves cutting speeds Swing-away, rear 6.4-gallon fuel tank Can…

EDCO 27″ Propane Burnisher

$0
0 review(s)

Rugged, Easy to Use and Dependable. The EDCO Propane Burnisher features: Dust Control Centered Body Design Powered by EPA certified Kawasaki 603cc Propane Engine Exceeds all EPA and Carb requirements Custom made integral LPG carburetor Low oil Shutdown Safety regulator fuel system Premium catalytic muffler Heavy-duty plastic pad driver Hand release pad lock Adjustable caster…

Urgent Questions About Equipment Or Diamond Tools?

Monday to Friday, 7:00 am to 4:00 pm our staff are standing by to answer your questions. Please use the contact form below and we will respond very quickly otherwise call us at 1-800-282-6470 and we will be happy to assist you with your order!