A Complete Line of Diamond Blades for all Cutting Applications

Showing 1–12 of 24 results

Carbide Demoliton Blade

$79$493
0 review(s)

Rips through any material! This blade has a single row of permanently imbedded carbide chunks. Sharp jagged leading edges do the cutting. The small diameter blades are used on an angle grinder to remove joint sealant and caulking materials from expansion joints that are filled with any soft filler such as polyurethane or non-hardening epoxies. …

Diamond Blade Bushings

$1$198
0 review(s)

Brass Blade bushings are precisely made to provide a secure press fit to the tool.   Professional Grade Quality Our Blade Bushings are all 100% brass and provide additional strength, stiffness and extends blade life Use Blade Bushing with the following equipment: Angle Grinder, High Speed Saws, Masonry Saws, Chop Saws, Low HP Saws, Tile & Stone…

Diamond X Industrial Cutting Blades

$0
0 review(s)

A unique and revolutionary new product. The Diamond X Metal Cutting Blade uses a vacuum brazing technology to allow a high concentration of diamond to be chemically and mechanically bonded to a steel surface. This results in a tool that will stay sharp and will grind or cut anything. This free cutting tool will provide up…

Glass Tile Blade Wet

$66$173
0 review(s)

Chip free cutting of glass tile. Given the high cost of glass tiles and glass mosaic, when working on a bathroom or kitchen, it is always good procedure to use a professional diamond blade. If you don’t you risk spending a fair amount of money to buy the tooling and equipment, you may end up with…

Highway Star Asphalt High HP Blades

$564$1,407
0 review(s)

A maximum performance blade you can count on.   The Highway Star blade was developed for use on long runs, where speed and life are important.  The blade comes with undercut protection segments to keep the steel center from wearing out. Our premium Highway Star blades deliver a professional looking finish to every job application. With a keyhole…

Highway Star Concrete High HP Blades

$564$1,407
0 review(s)

High Horsepower Blade with Maximum Performance. Highway Star Cured Concrete blades are designed for fast penetration of hard aggregate, reinforced concrete floors, bridge decks, industrial floors, etc.  Laser welded segments along with full radius undercut protection system, to keep the steel core from wearing.                    Purchasing in Volume? Ask for a Quote! Professional Grade Quality Wet Use Our Blade…

MAX Asphalt / Green Concrete / Block

$146$389
0 review(s)

A cost effective blade with professional performance. The Max Asphalt cutting blade is a great blade for the professional contractor who demands good tool performance with a low initial cost.  With a full radius of undercut protection and laser welded 10mm segments the Max Asphalt blade is great for cutting through green concrete, asphalt and soft abrasive masonry materials…

MAX Cured Concrete / Brick

$1$306
0 review(s)

 A Cost Effective Blade with Professional Performance.   One of our top sellers, for good reason.  Exceptional life and performance in most concrete and masonry materials.  It cuts all types of construction materials like block, concrete, precast, concrete pipes, and brick.  A specialty formulated matrix that is fused directly onto the steel core using state…

Multi-Cut Diamond Blade

$281$370
0 review(s)

Not your average Diamond Blade! The Multi-Cut Diamond Blade has a unique industrial diamond coating that is “vacuum brazed” onto the steel core and carbide side grit. This makes the diamond section always sharp and ready to cut. This blade was originally designed for Fire, Rescue and Law Enforcement agencies that need to cut their…

Porcelain / Ceramic Tile Blade Wet or Dry

$24$149
0 review(s)

Titan – The Ultimate Tile Blade FAST and chip free cutting of the hardest porcelain & ceramic tiles The Ultimate Tile diamond blade for Porcelain, Granite, Marble and Ceramic. The perfect blade for the professional stone/tile installer who wants one blade for all applications. The specially formulated cobalt matrix also features a heavy concentration of diamond.  Fast and…

Random Crack Chasing V Segment Diamond Blade

$80$183
0 review(s)

Smooth, chip free cutting. V Segment Crack Chasing blades are used to grind out and widen existing random cracks in concrete. Our heavy diamond concentration allows the operator to quickly do smooth chip free cutting. The V segment gives a wide cut at the top but is narrow at the bottom to conserve joint sealant…

Ring Saw

$10
0 review(s)

Cuts TWICE as deep as other 14″ Blades This “center less” Blade cuts up to 10″deep, twice as deep as regular 14″ blades. This professional blade will cut hard concrete and rebar FAST and reduces excavation and safety when cutting buried pipe and conduits. Each blade comes with a new drive wheel (STA-10407) Designed for use…

Showing 1–12 of 24 results